Browse By Category
Parameter & Video
|The powder raw material and adhesive in a cylinder are mixed fully at the bottom to become a humid soft material. The it is cut through high-speed crusher and become uniform granules.|
|1. The machine adapts horizontal cylinder structure. Its structure is reasonable.
2. Use air filled seal shaft to drive. When washing, it can be changed to water
3. Use fluidization to Granulate and the granule is near ball. Its flow is good;
4. Compared the traditional process,25% of adhesive can be reduced and the laying time can be shorted;
5. The time of mixing in dry is 2 minutes and the time of granulating is 1-4 minutes. Compared with the traditional process,4-5 times of efficiency is raised;
6. In the same sealed container, dry mixing, humidity mixing and granulating can be finished. It is in conformity with the requirements of GMP;
7. The whole operation has strict safe and protective measures.
We could not find any corresponding parameters, please add them to the properties table
Main technical parameter:
|Compressed air consumption||㎥/min||1.8|
Get A Free Quote
Laboratory Instruments & Machine